Check screening machine MSC

Vibrating sieve with central discharge MSC

This vibrating sieve can perform control sieving with high flow rates with continuous discharge of oversize material.

The vibration is through a twin unbalanced motors with a double extended shaft, fitted at both ends with eccentric weights. The rotation of the top and bottom eccentric weights creates vibration in the horizontal plane, which causes material to move across the screen cloth to periphery increasing the horizontal throw, causing oversize material to discharge at a faster rate. Increasing the eccentric mass, increases the horizontal throw, causing oversize material to discharge at a faster rate. Rugged Springs placed over the circular motor base amplifies the vibration

The vertical motion also minimizes blinding of screen by “near size” particles. The tangential component of motion is controlled by the angle of lead given to bottom weights with relation to top weight. Variation in lead angle controlled the spiral pattern of material travel over the screen cloth. Speed and flow pattern of material travel over the screen cloth can be set by the operator for maximum throughout & screening efficiency for any screen able product, wet or dry, coarse or fine, heavy or light, hot or cold. Typical material passes rapidly through the screen during its travel to the periphery. The oversize material get continuously discharged through a tangential outlet

Features

eliminate oversized and purify material;
higher throughput per unit mesh area;
easily to dismantle and clean;
dust proof;
can fit easily into existing installations and areas of limited headroom;
lowers noise levels typically as 70dBA;
available with ATEX certification, FDA IQ-OQ, GMP procedures;
available Jacob fittings and finishes for the food and pharmaceutical industry.

Models:

MSC16 (Ø 400mm)
MSC24 (Ø 600mm)
MSC36 (Ø 900mm)
MSC48 (Ø 1200mm)
MSC60 (Ø 1500mm)
MSC72 (Ø 1800mm)
MSC90 (Ø 2200mm)

Go back